MasterCraft LASER DISTANCE FINDER/MEASURING TOOL Instruction Manual Download Page 13

23

lasEr DistancE FinDEr/mEasurinG tool - 057-4585-0

24

lasEr DistancE FinDEr/mEasurinG tool - 057-4585-0

this mastercraft product is guaranteed for a period of 3 years from the date of original retail 
purchase against defects in workmanship and materials, except for the following components:
accessories, which are guaranteed for a period of 1 year from the date of original retail 
purchase against defects in workmanship and materials. subject to the conditions and 
limitations described below, this product, if returned to us with proof of purchase within the 
stated warranty period, and if covered under this warranty, will be repaired or replaced (with 
the same model, or one of equal value or specification), at our option. We will bear the cost of 
any repair or replacement and any costs of labour relating thereto.

These warranties are subject to the following conditions and limitations:

a) a bill of sale verifying the purchase and purchase date must be provided;
b) this warranty will not apply to any product or part thereof that is worn or broken or that has 

become inoperative due to abuse, misuse, accidental damage, neglect or lack of proper 
installation, operation or maintenance (as outlined in the applicable owner’s manual or 
operating instructions) or that is being used for industrial, professional, commercial or rental 
purposes;

c) this warranty will not apply to normal wear and tear or to expendable parts or accessories 

that may be supplied with the product that are expected to become inoperative or unusable 
after a seasonable period of use;

d) this warranty will not apply to routine maintenance and consumable items, including but not 

limited to fuel, lubricants, vacuum bags, blades, belts, sandpaper, bits, fluids, tune-ups or 
adjustments;

e) this warranty will not apply where damage is caused by repairs made or attempted by others 

(i.e.: persons not authorized by the manufacturer);

f)  this warranty will not apply to any product that was sold to the original purchaser as a 

reconditioned or refurbished product (unless otherwise specified in writing);

g) this warranty will not apply to any product or part thereof if any part from another 

manufacturer is installed therein or any repairs or alterations have been made or attempted 
by unauthorized persons;

h) this warranty will not apply to normal deterioration of the exterior finish, including but not 

limited to scratches, dents, paint chips, or to any corrosion or discolouring by heat, abrasive 
and chemical cleaners; and

i)  this warranty will not apply to component parts sold by and identified as the product of 

another company, which shall be covered under the product manufacturer’s warranty, if any.

Additional Limitations

this warranty applies only to the original purchaser and may not be transferred. neither the 
retailer nor the manufacturer shall be liable for any other expense, loss or damage, including 
but not limited to any indirect, incidental, consequential or exemplary damages arising in 
connection with the sale, use or inability to use this product.

Notice to Consumer

this warranty gives you specific legal rights, and you may have other rights, which may vary 
from province to province. the provisions contained in this warranty are not intended to limit, 
modify, take away from, disclaim or exclude any statutory warranties set forth in any applicable 
provincial or federal legislation.

W

ARRANTY

 

W

ARRANTY

 

Summary of Contents for LASER DISTANCE FINDER/MEASURING TOOL















Reviews: