5
lasEr DistancE FinDEr/mEasurinG tool - 057-4585-0
6
lasEr DistancE FinDEr/mEasurinG tool - 057-4585-0
SAFETY GUIDELINES
WARNING!
safety symbols in this instruction manual are used to flag possible dangers. the
safety symbols and their explanations require your full understanding. the safety
warnings do not, by themselves, eliminate any danger, nor are they substitutes for
proper accident prevention measures.
WARNING!
this safety alert symbol indicates caution, warning, or danger. Failure to obey a
safety warning can result in serious injury to yourself or others. to reduce the risk of
injury, fire, or electric shock, always follow the safety precautions.
Become familiar with the Laser distance finder/measuring tool
Before using this laser Distance Finder/measuring tool, read this instruction manual carefully.
Keep this manual in a safe place for future reference.
Important
this device should only be serviced by a qualified service technician. For more information, call
the toll-free helpline at 1-800-689-9928.
Read all instructions thoroughly
Save these instructions
CAUTION!
Do not attempt to use this laser distance finder/measuring tool until you have
read all instructions, safety rules, and warnings carefully and thoroughly. Keep this
instruction manual and review it frequently for reference.
WARNING!
Be sure to read and understand all instructions in this manual before using this
product. Failure to follow all instructions may result in hazardous radiation exposure.
WARNING!
Laser radiation.
Do not stare into the beam. turn the laser beam on only when
using this tool.
CAUTION!
Do not attempt to modify the performance of the laser device in any way. this may
result in a dangerous exposure to laser radiation.
WARNING!
use of controls, adjustments, or the performance of procedures other than those
specified in this manual may result in hazardous radiation exposure.
WARNING!
the use of optical instruments, such as, but not limited to, telescopes or transits to
view the laser beam will increase eye hazard.
this laser distance finder/measuring tool has a built-in laser light. the laser is a class ii and emits
output power of a maximum 1 mW and 620-690 nm wavelengths. these lasers do not normally
present an optical hazard. However, do not stare at the beam, as this can cause flash blindness.
the following label is on your laser distance finder/
measuring tool. it indicates the location from which
the laser distance finder/measuring tool emits
the laser light. Be aware of the laser light location
when using the tool. always make sure that any by
standers in the vicinity of use are made aware of the
dangers of looking directly into the laser.
• Do not remove or deface any product labels.
• avoid direct eye exposure. the laser beam can
cause flash blindness.
• the laser tool is not a toy. always keep it out of the reach of children. the laser light emitted
from this device should never be directed toward any person for any reason.
• Do not operate the tool around children or allow children to operate the tool.
• Do not place the tool in a position that may cause anyone to stare at the laser beam, whether
intentionally or unintentionally.
• Do not use on surfaces such as sheet steel that have shiny, reflective surfaces. the reflective
surface could reflect the beam back at the operator.
• always turn the laser tool off when not in use. leaving the tool on increases the risk of
someone inadvertently staring into the laser beam.
SAFETY GUIDELINES
CAUTION ATTENTION
MADE IN CHINA/FABRIQUÉ EN CHINE IMPORTED BY/IMPORTÉ PAR MASTERCRAFT CANADA
TORONTO, CANADA M4S 2B8
635nm, P≤1mW
Class II laser product
Complies with 21 CFR parts
1040.10 and 1040.11
635nm, Puissance≤1mW
Produit laser de classe II
Conforme au règlement 21 CFR
sections 1040.10 et 1040.11
057-4585-0
6V 4×1.5 V AAA Battery / 6V 4 piles AAA de 1,5V
LASER RADIATION
DO NOT STARE INTO BEAM
RAYONNEMENT LASER : NE REGARDEZ
PAS DIRECTEMENT LE FAISCEAU.
DATE CODE: CODE DE DATE :
LASER DISTANCE
FINDER / MEASURING TOOL
OUTIL À MESURER – TÉLÉMÈTRE À LASER