3
WARNING:
To avoid electrical hazards, fire hazards or damage to the impact
wrench, use proper circuit protection.
This impact wrench is wired at the factory for 110
–120 V operation. It must be
connected to a 110
–120 V 15 A time delayed fuse or circuit breaker. To avoid shock
or fire, replace power cord immediately if it is worn, cut or damaged in any way.
!
PRODUCT SPECIFICATIONS
Rating ……………………………….. 120 V, 60 Hz, AC
Amperes …………………………….
7.5 Amperes
Maximum torque: …………………..
240 ft lbs (325 Nm)
Blows per minute (BPM) ………….. 2700
Square drive ………………………..
½"
Net weight …………………………..
7 lb 8 oz. (3.4 kg)
WARNING:
Some dust created by power sanding, sawing, grinding, drilling
and other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
Lead from lead-based paints
Crystalline silica from bricks, cement and other masonry products
Arsenic and chromium from chemically-treated lumber
Your level of risk from these exposures varies, depending on how often you do
this type of work. To reduce your exposure to these chemicals, work in a well-
ventilated area and work with approved safety equipment such as dust masks that
are specially designed to filter out microscopic particles.
!
POWER TOOL SAFETY
!
ALWAYS WEAR EYE PROTECTION
Any power tool can throw foreign objects into your eyes which could cause
permanent eye damage. ALWAYS wear safety goggles (not glasses) that
comply with ANSI safety standard Z87.1. Everyday glasses have only
impact resistant lenses. They ARE NOT safety glasses.
WARNING:
Glasses or goggles not in compliance with ANSI Z87.1 could
cause serious injury when they break.
