11
FORWARD/REVERSE SWITCH
This impact wrench is equipped with a
rocker style forward/reverse switch (1) (see
Fig. 2).
1. To operate the impact wrench in the
forward direction, press and hold the
bottom part of the switch (2). This
direction of rotation will
tighten
the
fastener.
2. To operate the impact wrench in the
reverse direction, press and hold the
top part of the switch (3). This direction
of rotation will
loosen
the fastener.
REMOVING FASTENERS
One of the most common uses for the
impact wrench is to remove car wheel nuts
for rotating the tires. Car wheel nut removal
is used for illustrative purposes.
DANGER:
Before attempting to
remove a car wheel, make sure all
jacking, wheel blocking and wheel
removal safety procedures illustrated in
the Owner’s Manual for your car are
followed exactly. Failure to follow those
safety instructions could result in
serious injury or death.
ASSEMBLY AND OPERATION
Have you read “POWER TOOL
SAFETY”, “SPECIFIC SAFETY
RULES”, EXTENSION CORD
SAFETY” and “SYMBOLS” on pages
3, 4, 5, 6, 7 & 8 of this Manual? If not,
please do it now before you operate
this impact wrench. Your safety
depends on it!
Every time you use the impact
wrench you should verify the
following:
1. Safety glasses, hearing
protection and gloves are being
worn.
2. Socket is the correct size and is
“impact wrench” rated.
3. Socket is in good condition.
Failure to adhere to these safety
rules can greatly increase the
chances of injury.
WARNING
!
!
Fig. 2