7
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
SAFETY GUIDELINES (CONTINUED)
DO NOT UNDER ANY CIRCUMSTANCES REMOVE THE GROUND PIN.
The
3-prong plug must be inserted into a mating 3-prong grounded receptacle.
If the installation does not have such a receptacle, it must be changed to the proper type, wired
and grounded in accordance with the Canadian Electrical Code and all applicable local codes and
ordinances.
All wiring must be performed by a qualified electrician.
Keep hands clear of suction and discharge openings. To prevent injury, never
insert fingers into pump while it is plugged in.
Sump basins must be vented according to local plumbing codes.
Do not handle this pump with wet hands or while standing on wet or damp
surfaces or in water.
If a flexible discharge hose is used, make sure the pump is secured in the
basin to prevent movement. Failure to secure the pump could result in
flooding from switch malfunction.
This pump motor is equipped with an automatic resetting thermal protector
and may restart unexpectedly.
SAFETY GUIDELINES
FPO
CAUTION!
• Do not wear loose clothing that may become entangled in the impeller or other moving parts.
• Pumps generate heat and pressure during operation. Allow time for pumps to cool before handling or servicing.
• Keep clear of suction and discharge openings. Do not insert fingers in pump with power connected.
• Never operate a pump with a power cord that has frayed or brittle insulation.
WARNING!
• To reduce risk of electric shock, all wiring and junction connections should be made per the Canadian Electrical Code
(CEC) and applicable provincial and local codes. Requirements may vary depending on usage and location.
• To reduce risk of electric shock, always disconnect the pump from the power source before handling or servicing.
Please read this before installing or operating pump
. This information is provided for your
SAFETY and to PREVENT EQUIPMENT PROBLEMS. Most accidents can be avoided by using COMMON SENSE.
ts.
•
Always wear appropriate safety gear, such as safety glasses, when working on the pump
or piping.
•
Only qualified personnel should install, operate, and repair pump.
•
Make sure lifting handle is securely fastened each time before lifting.
•
Do not lift pump by the power cord.
•
Do not exceed manufacturer’s recommendation for maximum performance, as this could cause the
motor to overheat.
•
Secure the pump in its operating position so it cannot tip over, fall, or slide.
•
Keep hands and feet away from impeller when power is connected.
•
Any wiring of pumps should be performed by a qualified electrician.
•
Cable should be protected at all times to avoid punctures, cuts, and abrasions. Inspect frequently.
•
Do not remove cord and strain relief.
• Mastercraft
®
Canada is not responsible for losses, injury, or death resulting from a failure to observe
these safety precautions, or misuse or abuse of pumps or equipment.
