headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
6
SAFETY GUIDELINES
SAFETY GUIDELINES
Carefully read, understand and follow all safety instructions in this manual.
This
is the safety alert symbol. When you see this symbol, look for one of the following signal
words.
Indicates a hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
Indicates important information, that if not followed, may result in damage to
the equipment.
Safety Information
Read these warnings carefully. Know the application and limitations of this pump. Failure to
follow these warnings could result in serious bodily injury and/or property damage.
RISK OF ELECTRIC SHOCK. Disconnect and lockout power supply before
removing old pump or installing or servicing this pump.
RISK OF ELECTRIC SHOCK. This pump is supplied with a grounding
conductor and grounding type attachment plug. To reduce the risk of electric
shock, be certain that it is connected only to a properly grounded, grounding type receptacle.
For added safety, it is highly recommended to connect this pump to a GFCI (Ground Fault Circuit
Interrupter) outlet. Connect only to a receptacle that is adequately rated for the voltage and
amperage of this pump.
The installation of this pump must be in accordance with the Canadian
Electrical Code (CE code), National Plumbing Code of Canada (NPC),
International Plumbing Code (IPC) as well as all applicable local codes and ordinances.
Do not install this pump in any location classified as hazardous by the
Canadian Electrical Code (CE code)
Do not use this pump to pump flammable or explosive fluids such as gasoline,
kerosene, etc. Do not use this pump in flammable or explosive environments.
Use only with liquids compatible with pump component materials.
RISK OF ELECTRIC SHOCK. This pump has not been investigated for use in
swimming pool or marine areas.
RISK OF ELECTRIC SHOCK. DO NOT use the power cord to remove or lower
the pump into the basin. The cord may pull apart exposing bare wires which
could cause a fire or electrical shock. Use the handle supplied with the pump for installing and
removing the pump from the basin.
Do not run the pump dry. This pump relies on water for cooling. Running the
pump dry can cause the pump to overheat and the possibility of burns to
anyone that handles the pump. Running the pump dry will void the warranty.
Do not use this pump for potable/drinking water. Use only in applications for
which the pump is designed.
Do not expose pump to freezing temperatures. Discharge lines exposed to
freezing temperatures should be positioned with a downward slope to prevent
freezing.
model no. 062-3404-4 | contact us: 1-800-689-9928
