MAINTENANCE
17
AIR-POWERED SHEAR 058-7732-0
•
Air
-
operated tools must be inspected periodically, and worn or broken parts must be replaced
in order to keep tools operating safely and efficiently.
•
Inspect and replace worn or damaged O
-
rings, seals, etc. Tighten all screws and caps
frequently in order to help prevent personal injury.
•
Inspect the trigger, the spring, and the safety mechanism for free movement on a regular
basis in order to ensure that the safety system is fully functional.
•
Disconnect the tool from the air supply when it is not in use.
•
When temperatures are below freezing, keep tools as warm as possible using any safe,
convenient method.
•
Check the air supply for correct size and type of hose connectors. Ensure that there is no
additional drain on the air line and no moisture or restriction in the air pipe to avoid loss of
power or erratic action.
•
Clean the air strainer located in the area of the air inlet plug to avoid deposition of grit or gum
deposits which may lead to loss of power or erratic action and may also reduce the
performance of the tool.
WARNING!
Potential hazard that could result in serious injury or loss of life.
•
Disconnect the tool from the air supply before changing accessories, servicing,
or performing maintenance.
•
Only use the tool after replacing or repairing the damaged parts or accessories.
•
Use only recommended and properly rated replacement parts and knives.
Failure to comply will lead to serious injury or loss of life.
•
Repairs must be performed by a qualified service technician.
•
Never use excessively worn knives or any damaged parts.
Summary of Contents for 058-7732-0
Page 1: ...INSTRUCTION MANUAL AIR POWERED SHEAR 058 7732 0 OILDAILY...
Page 3: ......
