headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
9
SAFETY GUIDELINES
•
Wear ear protectors when using the drill/driver.
Exposure to noise can cause hearing loss.
•
Use protective gloves when removing the bit from the tool, or first allow the bit to cool
down.
The bit may be hot after prolonged use.
•
Use protective gloves when operating the tool.
Protective gloves can help to keep you from
being burnt or injured.
•
Keep your hands away from the motor-housing vents.
Hot gas comes from the vents
during operation.
•
Release the trigger immediately when a screw is tightened to avoid breaking the
screw.
•
The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
................. Alternating current
or d.c. ..............
Direct current
n0 ................... No-load speed
............... Class II Construction
…/min ........... Revolutions or reciprocation per minute
............... Grounding terminal
BPM ............... Beats per minute
RPM ............... Revolutions per minute
..............
WARNING – To reduce the risk of injury, user must read instruction manual
.
.............. WARNING – To reduce the risk of injury always wear eye protection.
.............. WARNING – To reduce the risk of injury always wear ear protection.
•
Protect the battery from heat and fire.
There is a risk of explosion.
•
Do not open the battery.
There is a risk of a short circuit.
•
Keep the cord and charger from heat to prevent damage to the housing or internal
parts.