headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
8
model no. 054-7520-2 | contact us 1-800-689-9928
SAFETY GUIDELINES
•
Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures
outside the specified range may damage the battery and increase the risk of fire.
SERVICE
•
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
•
Never service damaged battery packs.
Service of battery packs should only be performed by
the manufacturer or authorized service providers.
DRILL SAFETY WARNINGS
SAFETY INSTRUCTIONS FOR ALL OPERATIONS
•
Hold the power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory or fasteners may contact hidden wiring or its own cord.
Cutting accessory or fasteners contacting a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an electric shock.
SAFETY INSTRUCTIONS WHEN USING LONG DRILL BITS
•
Never operate at higher speed than the maximum speed rating of the drill bit.
At higher
speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece,
resulting in personal injury.
•
Always start drilling at low speed and with the bit tip in contact with the workpiece.
At
higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece,
resulting in personal injury.
•
Apply pressure only in direct line with the bit and do not apply excessive pressure.
Bits
can bend causing breakage or loss of control, resulting in personal injury.
ADDITIONAL SAFETY GUIDELINES FOR CORDLESS DRILL/DRIVER
•
When working with the power tool, always hold it firmly with both hands and provide
for a secure stance.
The power tool is guided more securely with both hands.
•
Secure the workpiece.
Clamping devices or a vise will hold the workpiece in place more
effectively than your hand can.
•
Do not allow gasoline, oils, petroleum-based products, etc., to come in contact with
plastic parts.
These materials contain chemicals that can damage, weaken, or destroy plastic.
•
Always wait until the machine has come to a complete stop before placing it down.
The tool insert can jam and lead to loss of control over the power tool.
•
Before performing any kind of work on the machine (e.g., maintenance, tool change,
etc.), or when transporting and storing the tool, always set the direction-of-rotation
switch to the centre (locked) position.
Unintentional activation of the On/Off switch may
result in personal injury.