15
model no. 054-7281-0 | contact us 1-800-689-9928
OPERA
TING INSTRUCTIONS
Fig. A
Fig. B2
Fig. C
Fig. D
Fig. E
Fig. F
Fig. G
Fig. H
Fig. B1
1
2
1
2
1
2
2. OPERATING THE ON/OFF SWITCH (See Fig. F)
——Switching the power tool ON:
Slide the switch forward.
——Switching the power tool OFF:
Slide the switch backward.
3. USING THE VARIABLE SPEED DIAL (See Fig. G)
Select the oscillation frequency (speed) while the motor is
running.
The variable speed dial can be used to set the optimum
oscillating frequency according to the accessories used and the
respective application.
High oscillation frequency:
Sanding, sawing, rasping and polishing stone and metal.
Low oscillation frequency:
Scraping, polishing varnishes.
4. LED WORK LIGHT (See Fig. H)
The LED work light allows you to keep a clear view under less
illuminated circumstances. To turn on the light, simply press the
on/off switch. When you release the on/off switch, the light will
turn off.
5. ELECTRONIC FEEDBACK
Your tool is equipped with an internal electronic feedback
system, which helps to keep the preselected speed virtually
constant between no-load and load conditions.
