13
VARIABLE SPEED TRIGGER SWITCH
This impact wrench is equipped with a variable
speed ON/OFF trigger switch.
1.
To start the impact wrench, gently squeeze
the trigger switch (2) (Fig. 7).
NOTE:
The impact wrench will turn at its
slowest speed when the trigger switch is
depressed slightly. The impact wrench will
turn at its fastest speed when the trigger
switch is fully depressed.
2.
To stop the impact wrench, release the
trigger switch.
NOTE:
Never allow your hand to cover the
air vents of the impact wrench. Running the
tool at slow speeds will cause it to heat up.
If the tool gets warm while running at slow
speeds, stop and allow it to cool.
REMOVING FASTENERS
One of the most common uses for the impact
wrench is to remove car wheel nuts for rotating
the tires. Car wheel nut removal is used for
illustrative purposes.
DANGER:
Before attempting to remove
a car wheel, make sure all jacking, wheel
blocking and wheel removal safety
procedures illustrated in the Owner’s Manual
for your car are followed exactly. Failure to
follow those safety instructions could result
in serious injury or death.
1.
Install the correct size of impact socket on
the impact wrench (Fig. 5).
2.
Set the forward/reverse button to the
RIGHT for removing fasteners (Fig. 6).
ASSEMBLY AND OPERATING
Fig. 7
For safety reasons, the operator must
read the sections of this
Owner’s Manual
entitled "GENERAL SAFETY
WARNINGS", "POWER TOOL SAFETY",
"SPECIFIC SAFETY RULES", "BATTERY
AND CHARGER SAFETY" and
"SYMBOLS" before using this impact
wrench.
Verify the following every time the impact
wrench is used:
1.
Safety glasses and hearing
protection are being worn.
2.
Socket or accessory is
"
impact
wrench
"
rated.
3.
Socket or accessory is in good
condition.
Failure to observe these safety rules will
significantly increase the risk of injury.
WARNING
!
!
!
Summary of Contents for 054-3165-2
Page 17: ...17 EXPLODED VIEW...
