background image

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

8

model no. 054-2436-4  |  contact us 1-800-689-9928

• 

Do not use a battery pack or tool that is damaged or modified. 

Damaged or modified 

batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.

• 

Do not expose a battery pack or tool to fire or excessive temperature. 

Exposure to fire or 

temperature above 265°F (130°C) may cause explosion.

• 

Follow all charging instructions and do not charge the battery pack or tool outside the 

temperature range specified in the instructions.

 Charging improperly or at temperatures 

outside the specified range may damage the battery and increase the risk of fire.

SERVICE

• 

Have your power tool serviced by a qualified repair person using only identical 

replacement parts. 

This will ensure that the safety of the power tool is maintained.

• 

Never service damaged battery packs.

 Service of battery packs should only be performed by 

the manufacturer or authorized service providers.

ADDITIONAL SAFETY GUIDELINES FOR THE INFLATOR

• 

The label on your tool may include the following symbols. The symbols and their 

definitions are as follows:

 

V .....................   Volts

 

A .....................   Amperes

 

Hz ...................   Hertz

 

W ....................   Watts

 

min .................   Minutes

 

PSI…………Pounds per square inch

 KPA………Kilopascal

 

BAR………A unit of pressure

 

 .................   Alternating current

 

 or d.c .............. Direct current

 n0 ...................  No-load speed
 

 ...............   Class II construction

 

…/min or …min 

-1

 ..........   Revolutions or reciprocations per minute

 

 ..............  

WARNING – To reduce the risk of injury, user must read instruction manual

.

 

 ..............   WARNING – To reduce the risk of injury always wear eye protection.

 

 ..............   WARNING – To reduce the risk of injury always wear ear protection.

SAFETY GUIDELINES

Summary of Contents for 054-2436-4





















Reviews: