MasterCraft 054-2436-4 Instruction Manual Download

Page: 14 / 20

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

model no. 054-2436-4 | contact us 1-800-689-9928

INFLATING SMALL INFLATABLES

(fig 6)

1. Remove the high

pressure hose from its storage area.

2. Move tire inflator lever straight up and insert adaptor.

Move the lever to the locked position.

3. Connect the adaptor to the item to be inflated.

4. Select either the DC or AC power source.

5. Slide the pressure selector to the left side first. Set

the pressure as you need according to the above
instruction.

6. To start inflating, press the on/off switch.

7. To stop inflating, press the on/off switch again.

8. When finished, move tire inflator’s lever straight up and then remove the tire inflator.

9. Unplug or remove the battery pack after use.

INFLATING AND DEFLATING USING LOW

PRESSURE HOSE

(fig 7 - fig 8)

LARGE INFLATABLES

1. Remove the low pressure hose from its storage area.

2. a. Connect low pressure hose to low pressure air

output for inflating

(BLOWER FUNCTION)

(fig 7)

Align the slots on the hose to the ribs on the output
and then turn the hose counter

clockwise until it

locks in place.

b. Insert low pressure hose fully into air intake for

deflating

(fig 8)

3. Connect other end of the hose to the item to be

inflated/deflated. Connect the hose directly or use the
adaptor attached to the hose.

4. Select either the DC or AC power source.

5. Slide the pressure selector to the right side first for low

pressure. To start inflating/deflating, press the on/off
switch.

6. To stop inflating/deflating, press the on/off switch

again.

7. When finished, remove the hose from the item to be inflated/deflated.

8. Unplug or remove the battery pack after use.

OPERA

TING INSTRUCTIONS

fig 6

fig 7

fig 8

Pinch valve

adaptor

Ball needle

adaptor

Low pressure
air output

Low pressure

hose

Rib

Air

intake

Slot

Summary of Contents for 054-2436-4





















Search results

Summary of Contents for 054-2436-4

Reviews:

Related manuals for 054-2436-4

Brands by name

Popular brands

MasterCraft 054-2436-4, Instruction Manual

Search results

Summary of Contents for 054-2436-4

Reviews:

Related manuals for 054-2436-4

Brands by name

Popular brands