CLKTCD Series User Manual
– Rev. 2.0.1
Page 25
USB drivers
A USB type B port has been included on the rear cover of the clock to provide a means of configuring
the clock via software and to allow for firmware upgrades for either firmware corrections or future
product enhancements.
To utilize the USB port, connect a USB type A to USB type B cable from the computer to the clock.
USB A cable end
(to computer)
USB B cable end
(to clock)
USB B port on clock
Once the clock is powered on and connected to a computer via a USB cable (not supplied), the
Windows Plug and Play manager will detect a new USB device and request drivers.
The drivers are located at
•
CD, “Time Code Products”
Products\CLKTCD\Drivers\
•
Hard drive
C:\Program Files\Masterclock\CLKTCD‐Set\Drivers\