CLKTCD Series User Manual
– Rev. 2.0.1
Page 21
DIP switch bank 2 (S2) configures how Time Code Control Bits/Fields are handled.
S2.1 and S2.2
Time code Control Bits or Control Fields
Hour offset
S2.1
S2.2
No additional encoding
OFF
OFF
(default)
IRIG 1344 & SMPTE Leitch
ON
OFF
Reserved for future use
OFF
ON
Reserved for future use
ON
ON
S2.3 and S2.4
Control the face plate illumination level, if your clock has this option installed.
Illumination Level (Brightness)
S2.3
S2.4
0%
OFF
OFF
(default)
35%
ON
OFF
70%
OFF
ON
100%
ON
ON
S2.5
This switch is currently undefined and reserved for future use.
Function
S2.5
Reserved
OFF
(default)
Reserved
ON
S2.6
Set the second hand motion mode
Function
S2.6
Sweep (continuous)
OFF
(default)
Step (pulse)
ON
S2.7
Calibrate hands to position. Used in conjunction with S2.8 “ON” to set the clock hands
Function
S2.7
Set to 12:00:00
OFF
(default)
Set to 6:00:00
ON
S2.8
Used in conjunction with S2.7 to set the clock hands
Function
S2.7
Run
OFF
(default)
Set
ON
Once the clock has been configured with the CLKTCD Set software, the switch settings will be
over‐ridden and the unit will ignore all switch settings until it’s reset to factory default.