NEVER LEAVE HEATER UNATTENDED WHILE
CONNECTED TO A POWER SOURCE
Turbo Electric Fan Heater User’s Manual
5
© 2021, Pinnacle Climate Technologies, Inc.
1 / 2
3
ASSEMBLY INSTRUCTIONS
4
5
6 / 7
Tools Needed:
– Phillips Head screw driver.
– 7 mm open end wrench.
1. Align holes in heater leg frame with lower inner
bracket.
2. Attach lower outer bracket to lower inner
bracket using screws.
3. Align lower inner bracket with side support.
4. Attach side supports to heater using tilt
adjustment knob.
5. Slide side supports into upper brackets, align
holes and insert screws to tighten.
6. Slide upper handle brackets onto front handle,
align holes and insert screws to tighten.
7. Slide rear handle into upper handle brackets,
align holes and insert screws to tighten.
