Master MAS4A090, User Manual

Page: 49 / 66

49
EN
39 Curl Post 1 No
40 Curl Pad 1 No
41 Spring Clips 1 No
ASSEMBLY INSTRUCTION:
Step 1:
Align cross brace (4) between left upright 1 and
right upright (38). Secure together using bolts(19)
washers(27) and support plates(12); then tighten
with washers (27) and locknut(25), as shown.
Attach left safety hook (13) and right safety
hook(14) by inserting each piece into their proper
holes as shown. Then secure both pieces by
screwing on nuts (36).
Step 2:
Attach the main support (3) to the front
stabilize bar(2). Use bolts (22) and washer
(28) to secure.
Then attach the angle support (9), as shown.
Use bolts (20,21) washers (28) and nuts
(26).
Step 3:
Connect the previously assembled pieces by
attaching the main support (3) to the base
bar(4) using bolts(19), washer(27), support
plate(12) and nuts(25).
Step 4:
Connect the leg developer support (5) to the
leg developer (6). Align pieces together and
secure with bolt (18), washers (27) and
nut(25).