NEVER LEAVE VENTILATOR UNATTENDED WHILE
OPERATING OR WHILE CONNECTED TO A POWER SOURCE
© 2015, Pinnacle Products International, Inc.
Industrial Steel Fan Ventilator User’s Manual
Figure 3
Operation
using The Ventilator:
1. Remove the ventilator from packaging. Be
certain no packaging materials are blocking
the air inlet (rear) or air outlet (front).
2. Place ventilator on level ground.
3.
Attach ducting (
Sold Separately
) securely
using the tie down strap. (Figure 2)
4. Connect ventilator to a grounded power outlet
with an approved power rating using a 14
AWG or higher gauge power cord.
5. Push power switch to the “ON” position.
(Figure 3)
Moisture Control:
This ventilator can be used to remove moisture
from an area.
NOTE:
This ventilator will not prevent mold or
mildew formation. To prevent mold or mildew
formation, this ventilator should be used in unison
with a dehumidifier.
Ventilation:
This ventilator can move large quantities of air
rapidly to provide ventilation and cooling.
Stacking:
The housing of these ventilators are designed to
stack one ventilator on top of another. (Figure 4)
NOTE THE MAC-708-SF DOES NOT STACK.
ALWAYS be certain the ventilator is on level
ground before stacking.
ALWAYS be certain ventilators are stacked
properly and securely before operating.
NEVER stack more than two (2) ventilators in a
single stack.
Figure 2
Tie Down Strap
RISK OF INjURY! DO NOT
MOVE VENTIlATOR WHIlE
IT IS OPERATING!
WARNING
Figure 4
Stacked
Ventilators
(2 Maximum)
4
