Henan Master Machinery Co., Ltd
Tel:(+86)17737606271
www.mastermachinerys.com
8
most important regular maintenance operation, over and above the checks in
the service schedule above, that can be performed. After each use your Edger
Power Trowel should be cleaned to remove any dust and debris from the
undercarriage and surrounding components. Use of a power washer will
make clean up quick and easy, especially if a non-stick coating was applied
prior to use.
In the Service Schedule above, items that should be checked, replaced or
adjusted are indicated by "○" in the appropriate column. Not all Edger Power
Trowel models include the same features and options and as such not all
service operations may have to be performed. For ease of recording place a
checkmark (√) through the "○" when the item is complete. If an item is not
required or not complete place an "×" through the "○" in the box.
All Edger Power Trowel have governed engine speed of 3600 rpm. See
engine manufacturer's manual for exact specifications. Care should be used
when making any adjustments to the Edger Power Trowel not to and lower
travel speed. It will create excessive "out-of-synch" vibrations resulting in
poor compaction,
maneuverability, excessive wear to the machine, and discomfort to the
operator.
Failure to have your Edger Power Trowel regularly serviced and properly
maintained in accordance with the manufacturer's instructions will lead to
premature and void the warranty.
FORWORD
The Bartell Edger Power Trowel, also known as a Mini-trowel/Edger, has been
developed to float and finish the edges of concrete floors, up to perimeter walls,
around columns and small areas, eliminating tiring hand troweling and increasing
overall productivity and quality.
