Henan Master Machinery Co., Ltd
Tel:(+86)17737606271
www.mastermachinerys.com
16
10. Concrete hardened on bottom of spider plate
11. Trowels unevenly worn/bent
12. Spider plate seized
13. Spider plate loose
14. Trowel arms bent
15. Adjusting screws (carriage bolts) incorrectly set
16. Main shaft bent
PITCH CONTROLS WILL NOT OPERATE BLADES
17. Cable broken or out of adjustment
18. Pressure plate assembly contaminated with concrete debris
19. Slot screw missing (under-side of handle)
20. Spider plate seized
21. Pressure plate and/or yoke arm broken or badly worn
22. Hand crank adjuster malfunctioning
BELT WEARING RAPIDLY
23. Belt is too tight
24. Pulley out of alignment
25. Wrong belt/defective belt
26. Clutch sticking
27. Gearbox seizing
OIL LEAKS
a.
Top of gearbox
Gearbox seal warn
Engine leaks
Too much oil in gearbox
b.
At main shaft or countershaft
Shaft and/or seal worn
Retaining screw(s) loose
TROWEL BLADES WILL NOT TURN
