Henan Master Machinery Co., Ltd
Tel:(+86)17737606271
www.mastermachinerys.com
18
cylinder.
6.2 Injections of hydraulic oil, water and lubricants
6.2.1 General norms
1
）
When filling the water and oil, do not remove the filtering net
in which situation dirt will not be brought into the tank easily.
2
）
Use the recommended lubricants and hydraulic oil.
3
）
Do not use different brands of lubricants and hydraulic oil.
4) Filling the new oil after the old oil is discharged and the
container is cleaned completely.
6.2.2 Recommended lubricant
1
）
Engine oil
in low temperature
SAE 10W-30
in high temperature
SAE 40
2) Hydraulic oil
wear-resistant
VG46
3
）
lubricating grease
Heat-resistant lithium saponify
4
）
Fuel oil
diesel oil (meet national standard)
7. Electrical principal drawing
