Master F22, User Manual

Page: 76 / 77

EN
（
8
）
Setting
：
enter to set interface
，
there are three portion of contents
，
about
introducing ourselves,
、
problems feedback
、
exit interface
（
9
）
Error report and information disposition
"E0 Safety Lock "
"E1 Losing Speed Signal"
"E2 Overloading"
"E4 Engine Exception"
"E5 Communication Connection Interrupting"
"E6 Under voltage Protection"
E0 Content "Connect to safety lock according to the picture above."
E1 Content "Make sure speed signal wire works fine and retry powering on system."
E2 Content "Re powering the controller to clear the error."
E4 Content "Make sure the engine wire and voltage work fine, then re powering to clear
the error."
E5 Content "Check the communication wire whether it's connected or not."