9
When the preselected torque is reached during drilling,
the unit switches off and remains off.
Advices for operation
Sharpening drill bits
Only HSS drill bits in perfect condition (HSS = high speed
steel) should be used for drilling metal. Würth quality is
guaranteed by the Würth accessory program.
Maintenance and Cleaning
Before any work on the machine itself, pull the
mains plug.
For safe and proper working, always keep the machine
and the ventilation slots clean.
Keep the tool holder clean at all times.
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be car-
ried out by an authorized customer service agent for
Würth power tools.
In all correspondence and spare parts orders, please
always include the 8-digit order number given on the
nameplate of the machine.
For the current spare parts list of this machine, log into
the Internet under “http://www.wuerth.com/partsman-
ager” or ask for a copy at your nearest Würth branch
office.
Environmental Protection
Recycle raw materials instead of dispos-
ing as waste.
The machine, accessories and packaging
should be sorted for environmen-
tal-friendly recycling.
The plastic components are labelled for categorized
recycling.
Warranty
For this Würth tool, we provide a warranty in accord-
ance with statutory/country-specific regulations from
the date of purchase (proof of purchase by invoice or
delivery note). Damage that has occurred will be cor-
rected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the warranty.
Claims can be recognised only when the tool is pre-
sented undisassembled to a Würth branch office or a
Würth field service employee.
Declaration of Conformity
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization documents: EN
60
745-1,
EN 60 745-2-1,
EN 55 014-1,
EN 55 014-2,
EN 61 000-3-2, EN 61 000-3-3 according to the pro-
visions of the regulations 98/37/EC, 73/23/EC,
89/336/EEC.
05
Adolf Würth GmbH & Co. KG
P. Zürn
R. Bauer
0
1
2
3
4
5
6
7
8
9
10
50
25
Torque (Nm)
Torque - Control
80 min
-1
530 min
-1
Subject to change without notice
BS 13-SEC.book Seite 9 Mittwoch, 2. Februar 2005 3:32 15
