EN
DO NOT over
-in
flate the board.
A
max pressure of 15 psi is adequate.
T
he easiest gauge of a good working pressure is to have the
chambers inflated to a firm pressure when you press on them.
DO NOT pump to a high pressure and let the board sit out in the hot
sun. if the board is going to be in a warm environment, slightly
deflate the board and allow the heat from the sun to increase the
internal pressure.
W
hen paddling the colder temperature of the
water may cause a slight loss in chamber pressure.
I
t is a good idea to
carry a pump with you so that you can add some air to the chambers
if necessary.
ALU telescopic ISUP paddle
Y
our board paddle comes in three pieces.
T
o build the paddle, hold
the button in while sliding the pieces together until they click into
place.
T
he last section
(top) of the paddle is adjustable.
T
o find the ideal height for your paddle, start by building the paddle
so it is 6 inches taller than your own height. From this point, adjust
the top section up or down until the length is comfortable for you .
a
longer paddle is better suited for a smooth, easier paddling motion.
A
shorter paddle is good for performance or competition riding.
