Page 9
9. Electrical connection
E
LECTRIC SHOCK HAZARD
.
Before beginning any work on the machine's wiring, make certain that the
electric power has been disconnected; failure to observe this rule may
compromise safety.
Cable entry to the terminal block
•
No connection to the symbols
indicated to the side.
FUNCTION NOT PRESENT in this
system.
•
Connection of the rain detection sensor.
-
Red (+) connected to +15V,
-
Black (-) connected to -15V,
-
Blue (N.O. contact) connected to “
PIOGGIA
”,
-
Green (common) connected to -15V,
-
Violet (N.C. contact) not used and should be
electrically isolated.
•
Connection of the manual control with 3
conductors [the common conductor on (
COM
), the
conductor for opening on (IN 1) and the conductor
for closing on (IN 2)].
10. Open and close commands
10.1. Remote electronic control (Radio remote control)
The WI-CONTROL radio remote control is the standard-equipped device for controlling
the CLOUD RADIO motor.
For more details on the characteristics and operation of the WI-CONTROL radio remote
control, consult the instructions manual provided with the radio remote control itself.
Some functions of the radio remote control are not discussed in this manual.
T
HE TRANSMITTER IS
NOT
FACTORY
-
PROGRAMMED
.
First follow the radio remote control instructions and then those provided below
concerning the specific operation of the machine you would like to control.
Summary of Contents for 1120.8
Page 17: ...Page 17 14 5 Configurations ...
Page 21: ...Page 21 21 Conformity ...
