Master 1120.8, Instruction Manual

Page: 4 / 22

Page 4
1. Safety indications
ATTENTION B
EFORE INSTALLING THIS APPLIANCE
,
ENSURE ALL SAFETY INDICATIONS
HAVE BEEN READ CAREFULLY AND UNDERSTOOD IN ORDER TO PREVENT CONTACT WITH
ELECTRICITY
,
INJURY OR ANY OTHER INCIDENT
.
THE MANUAL SHOULD BE CONSERVED
FOR FURTHER CONSULTATION AT A LATER DATE
.
Series CLOUD RADIO chain actuators have been designed to move windows.
Use for any applications other than those indicated must be authorised by the
manufacturer after technical review of the assembly.
The following safety indications should be observed carefully.
The appliance must be installed by competent and qualified technical personnel.
After removing packaging, check for any damage on the appliance.
Plastic bags, polystyrene, small metal parts such as nails, staples etc should be
placed out of the reach of children as they constitute a potential source of risk.
Before connecting the appliance, check that the power supply has the same
specifications as those indicated on the technical data label on the appliance.
This machine is destined exclusively for the use for which it has been designed
and the manufacturer accepts no responsibility for damage incurred by improper
use.
The actuator is destined exclusively for installation indoors. For any special
application we recommend you consult the manufacturer beforehand.
Power supply installation must comply with any regulations in force.
To ensure efficient separation from the grid, an approved type of bipolar pulse
switch should be used. An omnipolar general power switch with minimum distance
of 3 mm between contacts should be installed upstream of the control line.
Do not use solvents or jets of water to wash the appliance. The appliance should
not be submerged in water.
Repairs should only be performed by qualified personnel at assistance centres
authorised by the manufacturer.
Always request exclusive use of original spare parts. Failure to respect this
condition could compromise safety and invalidate the benefits contained in the
warranty for the appliance.
In the event of any problems or queries, consult your agent or contact the
manufacturer directly.