background image

 

18 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Table of Contents 

  

Master Water Conditioning warrants its Commercial R.O. Drinking Water System to be free of defects in  

materials and workmanship for a period of one year from the date of purchase when installed and operated within 

recommended parameters. 

  

Master Water Conditioning will repair or replace at its discretion any defective component.  This warranty does not 

cover the disposable sediment and carbon filters whose service life depends on feed water conditions.  The 

reverse osmosis membrane is warranted for one year.  If the required pre-filter conditions to the  

membrane are not followed, the membrane will not be warranted. 

  

CONDITIONS OF WARRANTY 

  

The above warranty shall not apply to any part of the Master Water Conditioning Commercial R.O. Drinking Water 

System that is damaged because of occurrences including but not limited to neglect, misuse, alteration, accident, 

misapplication, physical damage, or damage caused by fire, acts of God, freezing or hot water. 

  

All replacement filters and membranes must be Master Water Conditioning filters and membranes or the warranty 

is void.  If the unit is altered by anyone other than Master Water Conditioning the warranty is void. 

  

To obtain warranty service: (A) contact your local dealer who supplied the unit, or ( B) contact the factory for the 

dealer nearest you.  It is the obligation of the owner to pay for shipping or travel charges to return the defective 

part. 

  

This is the sole warranty made by Master Water Conditioning with respect to the R.O. Drinking Water System.  No 

other warranties, expressed or implied, are given including merchantability or fitness for a particular purpose,  

incidental or consequential damages, or other losses. 

  

This exclusion applies to the extent exclusion is permitted by law. 

  

No person or representative is authorized to assume for Master Water Conditioning any liability on its behalf, or in 

its name, except to refer the purchaser to this warranty. 

  

This warranty gives you specific legal rights, you may also have other rights which vary from state to state

 

WHOLE HOUSE R.O. DRINKING WATER SYSTEM

 

             

                 

ONE YEAR LIMITED WARRANTY

 

  

Summary of Contents for PURO PRO 1800 SC Series





















Reviews: