5
WATCH THE VIDEO:
MasterSpas.com/axis
g.
d.
ROTATING LEVER LATCH
At the center of the 8'
end of the swim spa, use a level or straight edge to
reference the top of the swim spa shell. Measure down
10" and mark this center point for the top center screw
of the Rotating Lever Latch Base (d). With the arrow
facing up, mount base of Rotating Lever Latch to swim
spa skirting (Figure 4) using 1 #10x1 ½” screw (h) for the
top mounting point. Use 2 #10x2½" screws (g), for the
two lower mounting points on the base (left and right).
The Rotating Lever Latch may mount over a skirt vent
which is normal (if vent prohibits base mounting flush,
simply remove vent when mounting base). Mount
with screws at the lowest point in the slots on the
Rotating Level Latch Base. The slot is present to allow
downward adjustment of the base if necessary later.
Repeat for opposite end.
(Continued...)
3.
FIGURE 4
INSTALLATION
Top Center
Screw Point
Using
Side Screw
Points
Using
h.
Summary of Contents for axis
Page 1: ...INSTALLATION USER GUIDE...