background image

WELCOME TO THE ULTIMATE HOT TUB EXPERIENCE!

We sincerely hope your spa life is a pleasant experience. If problems should 
arise, contact your authorized Marquis

®

 dealer. Or contact Marquis Corp. at 

any of the following:

  Email: [email protected]
  Web: www.marquisspas.com
  Marquis Corp.
  596 Hoffman Road
  Independence, OR 97351, USA

This manual is provided to enhance your enjoyment of your spa and to 
prevent non-warranty situations. It is your sole responsibility to read, under-
stand and comply with the instructions in the owner’s manual. Please save 
your original sales receipt for reference in case of a future warranty claim. 
Failure to use, maintain or install the spa in compliance with this owner’s 
manual could result in loss of warranty coverage.

SERIAL NUMBER LOCATION

You will find the serial number on the tag in the equipment area.

PLEASE FILL OUT AND KEEP FOR FUTURE REFERENCE

Name of Purchaser_________________________________________________________

Date of Purchase ________________________________________________________

Address _________________________________________________________________

City _________________________________State _________Zip Code ____________ 

Telephone ______________________________________________________________

Spa Model/Color ________________________________________________________

Spa Serial # _____________________________________________________________

Pack Serial # ____________________________________________________________

Dealer’s Name __________________________________________________________

Dealer’s Address ________________________________________________________

City ____________________________________State_______Zip Code_____________

Telephone ________________________________________________________________

Every effort has been made to ensure the accuracy of this manual. However, 
Marquis

®

 reserves the right to improve its product without notice. This could 

create a minor variation between this manual and the actual product you 
receive. We apologize for any inconvenience this may cause.

OWNER’S MANUAL

1

Summary of Contents for V65L




























































Reviews: