TWILIGHT SPA – DIAGNOSTIC MESSAGES
TS 6.1 • TS 7.1 • TS 8.1
30
ACTION REQUIRED
The control panel will be disabled until
power returns. Spa settings will be
preserved until next power up.
After the pump has been running
for 2 minutes, the temperature will
be displayed.
DO NOT ENTER THE WATER. Remove the
spa cover and allow water to cool. Once
the heater has cooled, reset by pushing
any button. If spa does not reset, shut
off the power to the spa and call your
dealer or service organization.
DO NOT ENTER THE WATER. Remove the
spa cover and allow water to cool. At
107°F/42°C, the spa should automatically
reset. If spa does not reset, shut off the
power to the spa and call your dealer
or service organization.
No action required. The pump(s) will
automatically activate regardless of
spa status.
If the problem persists, contact your
dealer or service organization. (May
appear temporarily in an overheat
situation and disappear when the
heater cools.)
If the problem persists, contact your
dealer or service organization. (May
appear temporarily in an overheat
situation and disappear when the
heater cools.)
MEANING
No message on display.
Power has been cut off
to the spa.
Temperature
unknown.
“Overheat” - The spa
has shut down. One of
the sensors has detect-
ed 118°F/48°C at the
heater.
“Overheat” - The spa
has shut down. One of
the sensors has detected
that the spa water is
110°F/43°C.
“Ice” - Potential freeze
condition detected.
Spa is shut down. The
sensor that is plugged
into the Sensor “A”
jack is not working.
Spa is shut down. The
sensor that is plugged
into the Sensor “B”
jack is not working.
MESSAGE
Master Spa Parts
Call Us Today : (920) 727 - 1700
Master Spa Parts - 1068 American Drive, Neenah, WI, 54956, USA
