14
PUNCHING HOLES IN SANDPAPER
– cont’d
1. Install the sandpaper as shown in
Fig. 3 & 4.
2. Place the hole punch (1) on a sturdy
flat surface (Fig. 5).
3. Align the corner of the sanding pad (2)
with the corner of the hole punch (3).
This will ensure the holes are punched
in the correct location.
4. When sanding pad is correctly aligned
on the hole punch, press the sanding
pad firmly onto the hole punch.
NOTE:
The sharp pegs (4) in the hole
punch will pierce the sandpaper in the
correct location.
ON/OFF SWITCH
To turn the switch ON, press the left hand
side of the ON/OFF switch (1) (Fig. 6). To
turn the switch OFF, press the right hand
side of the ON/OFF switch (2).
ASSEMBLY AND OPERATING
Fig. 5
Fig. 6
Summary of Contents for 134465
Page 19: ...19 EXPLODED VIEW...
