cleaning and maintenance
%851(56
7RSSODWH
Ŷ
To keep the surfaces in good condition, they must be cleaned regularly after each
use, after having allowed them to cool
.
Attention, it isn't recommended to pour water on the worktop to prevent it from penetrating
inside the product and causing damage.
Ŷ
Regularly clean the surface of the hob using a cloth soaked in hot water to which
neutral not-abrasive detergent has been added
(for stainless steel hobs, rub following
the direction of the steel brushing)
.
Ŷ
Dry the hob carefully after cleaning it.
Ŷ
The stainless steel parts of the appliance may become discolored over time. This is
normal due to high temperatures. Each time the appliance is used these parts should
be cleaned with a specific product for stainless steel.
Ŷ
5HPRYHWKHEXUQHUOLGVDQG)ODPH6SUHDGHUVE\SXOOLQJWKHPXSZDUGVDQGDZD\
.
Flame spreaders
and enamelled
burner
lids are inevitably subject to wear and tear and can
get stained when using your appliance.
Ŷ
Immerse them in boiling water with a little neutral detergent.
(1
18
Ŷ
After cleaning and washing them, dry them by rubbing them carefully. Make sure
that the holes / grooves from which the flame comes out are clean and completely dry.
Ŷ
Clean the fixed parts of the burner cup with a damp cloth and then dry.
Ŷ
Gently wipe the ignition and flame control device (thermocouple) with a well-wrung
pan and dry it with a clean cloth.
Ŷ
Before replacing the enamelled lids and flame spreaders on the respective burner
cups, make sure that the injector is not obstructed to avoid burner operating problems.
Summary of Contents for MKHG 641F E XS
Page 59: ......
Page 60: ...P N 16166200A22291...