1
2
“Cotter” Pin
Fixed Screws
How to replace the main burner
1. Open the grill hood and remove the warming
rack (A), cooking grates (B) and flame
tamers (C) as shown in Fig. 1.
2. Remove the cotter pin from the main burner,
as shown in Fig. 2.
3. Remove the two screws that attach the main
burner electrode & wire to the main burner.
4. Remove and discard the old main burner and
replace it with the new one.
Note: When reinstalling the main burner make
sure the main valve stem is inserted into main
burner tube opening.
5. Reinstall the cotter pin and the two screws that
attach the main burner electrode & wire.
6. Reinstall the warming rack, flame tamers and
cooking grates.
How to replace the electronic ignition and main
burner electrode wire :
1. Open the grill hood and remove the warming
rack (A), cooking grates (B) and flame tamers (C)
as shown in Fig.1.
2. Remove the two screws that attach the main
burner electrode & wire to the main burner as
shown in Fig. 2.
3. From underneath the grill just above the left side
cart door, remove the two screws holding the
ignition heat shield in place. Remove the heat
shield through the opening just above the door. Fig.
3.
4. Unscrew the push button igniter button and lock
nut and then remove the push button igniter
through the same opening. Unplug the main burner
electrode wire that you are replacing from the back
of the push button igniter and then remove the
electrode and wire from the grill. Fig. 03.
33
REPLACING MAIN BURNER
A
B
C
3
Fixed Screws
Ignition heat shield