Model no. 043-1034-2 | Contact us: 1-855-803-9313
9
8
TM
Fig.6
CAUTION:
1) Do not immerse the motor unit in liquid to prevent the risk of electric shock.
2) Do not use rough scouring pads or cleansers on parts or finish.
Cleaning and Maintenance
This product contains no user serviceable parts. Refer service to qualified service personnel.
1. Before cleaning, unplug the blender.
2. Always wash immediately after use for easier cleaning. Don’t let food dry on the jar assembly
as this will make cleaning difficult.
3. Pour a little warm soapy water into the jar and press button for a few seconds.
Then empty water from the jar.
4. Dismantle all detachable parts. Lift the jar assembly off the motor unit. Detach the blade
assembly by turning it clockwise from the jar base bottom, and remove the seal ring and
blade assembly (See Fig.6).
1-Year Limited Warranty
This Product carries a one (1) year warranty against defects in workmanship and materials. Trileaf Distribution
agrees to replace the defective product free of charge within the stated warranty period, when returned by the
original purchaser with proof of purchase. This product is not guaranteed against wear, misuse and/or abuse.
Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
5. Rinse the measure cup, lid, seal ring, jar and blade assembly by hand or in a dishwasher and
then dry.These are dishwasher safe. The temperature should not exceed 70°C (160°F).
6. Brush the blade clean using warm soapy water, then rinse thoroughly under the tap. Don’t touch
the sharp blades, handle carefully. Don’t immerse the blade assembly in water. Leave to dry upside
down away from children.
7. Wipe the motor unit with a damp cloth and dry thoroughly. Remove the stubborn spots by rubbing
with non-abrasive cleaner. If liquids spill into the motor unit; first unplug the unit, then wipe with a
damp cloth and dry thoroughly.
8. When blending foods at maximum level or hard fruits and vegetables, ensure that the button
is set at highest speed (speed 6). If the speed is too low, the motor will be damaged due to
insufficient torque. When the motor speed is found to be too slow, you must immediately use
a higher speed setting to blend or press button “0” to stop blend!
Warranty
