Model no.043-1034-2 | Contact us: 1-855-803-9313
5
4
TM
Switch Buttons
Before first use
OFF
1. Unpack the appliance and place all parts on a flat, level surface.
2. The jar assembly (including the measure cup, lid, jar, seal ring, blade assembly and blade base) has
already been assembled into the motor unit. Disassemble to wash all detachable parts except the motor
unit. Refer to the section on Cleaning and Maintenance.
3. Once all pieces have been cleaned and dried thoroughly, reassemble.
1) Invert the jar onto a level surface, holding the jar handle, put the seal ring and blade assembly onto the
jar base bottom and secure the blade assembly by turning it counter-clockwise until tight (See Fig.1).
2) Reposition the jar assembly with its opening upwards and put the lid onto the jar assembly. Place the
measure cup into the lid by fitting the small knob on the both sides of the cup into the slots
of the lid and turning the cup clockwise until tight. (See Fig.2).
3) Place the assembled jar onto the motor unit by aligning the strip on the assembled jar bottom.
(See Fig.3).
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider that the other). To reduce
the risk of electric shock, this plug is intended to fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to modify in any way.
CAUTION: Jar and jar base is now secure. Do not try to twist the jar and jar base onto motor unit
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
Know Your Blender
Measure cup
Lid
Jar
Blade assembly
Seal ring
Blade Base
Motor unit
Switch button
Using Your Blender
o
o
Pulse
Low speed
High speed
