background image

www.masterbattery.es

03

NO.

Items

-20°C

Testing method

Internal resistance 

3

≤25mΩ

50% battery SOC state frequency of 1 KHZ ac 
resistance tester. 

Criterion

Discharge 
Temperature 
Characteristics

At 25±5°C discharge the battery with the current of 
0.33C to the cut-off voltage and record charge 
capacity. Store the battery at various temperatures 
for 2h and discharge the battery with 0.33C to the  
cut-off voltage.

0°C

25°C

55°C

≥70%

≥80%

≥100%

≥95%

Charge the battery to full capacity and store it for 28 
days, and then discharge it with 0.33C to the cut-off 
voltage.

Charge Retention 
ability

Residual
capacity ≥80%

Discharge with the current of 0.33C until it can’t 
discharge, and then rest it for 1h. Charge the battery 
following CC (1C)/CV (43.8V) mode to full capacity, 
and then rest it for 1h. Repeat above process until full 
charged capacity is no more than 80% of normal 
value. Accumulated times is defined as cycle life.

4

Cycle life (DOD%100)

≥2500 cycles

5

Polígono industrial La Dehesa
C/ Dehesa Vieja,nº2 Nave 16
28052 Madrid (Spain)
Tel. (+34) 918 021 649
Fax. (+34) 917 750 542
[email protected]

4. Product Performance

6

Recovery
capacity ≥90%

Rest for 1 hour after fully charged, then discharge with 
0.33C current until the battery reaches the discharge 
cutoff voltage. Repeat above process for three times, 
if the discharge time is not less than 180 minutes, you 
can stop and define the Discharging current*time 
value (Ah) as battery capacity.    

Rated Capacity 

1

100Ah

Minimum Capacity 

2

98Ah

Though

user can read the battery system information 

such as voltage, current, SOC, temperature… 
and so on. 

Communication 
Function

Bluetooth

7

UE-36Li100BL

Summary of Contents for UPOWER Ecoline UE-36Li100BL








Reviews: