9
A6
Funktionsausgang 6 (-),
Taktgebersimulation
Reed1
Kontakteingang 1,
Pendelfunktion
Reed2
Kontakteingang 2,
ohne Funktion
Anschluss und Benutzung der erwei-
terten Funktionen (Servo, Taktgeber,...)
entnehmen Sie Bitte der Konfigurations
-
anleitung.
3.2 Licht und Funktionsausgänge
Die folgende Zeichnung stellt die
Verschaltung der einzelnen Licht- und
Funktionsausgänge dar. Der Pluspol ist
der gemeinsame Pol für alle Funkti-
onsausgänge, der Minuspol wird einzeln
für jede Funktion durch das Digitalsys-
tem geschaltet.
Der Kontakteingang 1 ist hier auch
gegen den Pluspol zu schalten.
A6
function output 6 (-),
pulse generation
Reed1
contact input 1,
shuttle operation
Reed2
contact input 2,
without function
Information about how to connect and
use the additional functions (e.g. RC
servo, chuff sensor…) may be found in
the Configuration Manual.
3.2 Light- and function outputs
Illustration 3 shows the wiring diagram
of the light- and function outputs. The
plus terminal (22V) is the common
terminal for all function outputs. The
negative pole is switched individually by
the respective outputs of the decoder.
The reed contact 1 is operated the same
way.
Abbildung 3: Verschaltung der Licht- und Funktionsausgänge (Glühbirnensymbol
steht für allgemeinen Verbraucher)
Illustration 3: Connection of the light- and function outputs (the bulb symbol stands
for all regular loads)
991016_BDA_eMOTION_XL_2013_04_ML.indd 9
17.04.2013 12:03:14