10
3.3 Einbau in Loks ohne Schnitt
-
stelle
Generell lässt sich der Dekoder in Loks
ohne Schnittstelle besonders einfach
einbauen. Dabei wird der Dekoder mit
Hilfe der mitgelieferten Kabel direkt am
Getriebe angeschlossen. Der Aufbau des
Getriebes kann abhängig vom Hersteller
unterschiedlich sein.
ACHTUNG: Bei Piko
®
-G Loks sind die
Motor- und Gleisanschlüsse gegenü-
ber LGB
®
-Getrieben vertauscht!
3.4 Einbau in Loks mit LGB
®
Dekoder-Schnittstelle
Mit dem LGB
®
Schnittstellenkabel
(Art.-Nr. 8150602) kann der Dekoder
zusätzlich an LGB
®
Loks mit Dekoder-
schnittstelle eingebaut werden. Über
3.3 Installation without interface
Installation in a locomotive without
interface is pretty simple. The decoder
must be connected to the 4 leads of the
motor block utilizing the color coded
wires provided. The design of the motor
block may vary with the manufacturer.
Note: The motor and track connec
-
tion with PIKO
®
-G locos is switched
compared to LGB
®
.
3.4 Installation with LGB
®
decoder
interface
Using the LGB
®
interface cable (Item
8150602) the eMOTION XL decoder
may be installed into locomotives
equipped with a decoder interface. The
Abbildung 4: Anschluss am LGB
®
Getriebe
Illustration 4 : Hook-up at LGB
®
motor block
991016_BDA_eMOTION_XL_2013_04_ML.indd 10
17.04.2013 12:03:14