background image

4

1.2. Funktionsumfang

Der Powercap dient zum Überbrücken 

von kurzzeitigen Unterbrechungen der 

Gleisspannung bei Gartenbahnlokomoti-

ven oder zur Pufferung von Geräuschen 

bei Analogbetrieb im Stillstand. Der 

Motor und Sonderfunktionen wer-

den während dieser Unterbrechung 

aus dem Speicher versorgt. Somit 

können Lokomotiven problemlos über 

Weichenherzstücke oder Isolierstellen 

fahren, ohne stehen zu bleiben. Die 

Dauer der Pufferung beträgt je nach 

angeschlossener Last, Geschwindigkeit 

und Ladezustand bis zu 30 Sekunden. 

Durch eine integrierte Steuerung wird 

der Powercap immer optimal an das 

aktuelle Betriebsverhalten angepasst. 

Bei der Programmierung des Decoders 

wird der Powercap automatisch kom-

plett abgeschaltet, sofern die Elektronik 

das unterstützt. Ansonsten kann der 

Powercap mit dem mitgelieferten 

Schiebeschalter abgeschaltet werden. 

Aufgrund der 2-teiligen Bauform lässt 

sich der Powercap auch in kleinere 

Gartenbahnfahrzeuge verbauen.

1.3. Lieferumfang

• Powercap maxi (2-teilig)

• Schiebeschalter

• Bedienungsanleitung

1.2. Features

The Powercap is used to compensate 

short-term track power interruptions for 

G scale locomotives as well as standing 

sound operation in analog mode. The 

motor and the locomotive functions are 

operated with the Powercap during a 

track power interruption. Locomotives 

can easily cross switch/point frogs or 

insulated track sections (e.g. dirty track 

sections) without stopping. The buffer-

ing time depends on the connected 

load, driving speed and charge level and 

lasts up to 30 seconds. The integrated 

electronic control always adapts the 

Powercap state to the current operating 

performance. During programming 

procedures the Powercap is automati-

cally deactivated if the decoder supports 

a buffer control connection. Otherwise 

the Powercap can be operated using the 

enclosed switch to deactivate the charg-

ing. The flexible 2-piece design makes 

installation and fitting very easy and 

suitable for smaller G scale locomotives.

1.3. Scope of Supply

• Powercap maxi (two-piece)

• slide switch

• manual

Summary of Contents for eMOTION Powercap maxi













Reviews: