5
(z. B. Funktion mit Gleis) kurzge-
schlossen, kann diese Sicherung nicht
wirken und der Dekoder wird zerstört.
•
Der Dekoder ist im Auslieferungs-
zustand auf Weichenadresse 1..4
eingestellt. Möchten Sie den Dekoder
mit einer Lokadresse oder einer hohen
Lokadresse verwenden, müssen Sie
CV 29 entsprechend ändern.
•
Bauen Sie das Modul an einen
geschützten Platz ein. Schützen Sie es
vor andauernder Feuchtigkeit.
•
Das Modul darf nur an digitale
Zentralen für Modelleisenbahnen nach
NMRA-DCC Norm angeschlossen wer-
den. Ein Anschluss an andere Geräte,
kann zur Zerstörung führen.
2.1. Anschlüsse
2.1.1. Funktionsausgänge
• Die Funktionsausgänge 1+2 (SW1),
3+4 (SW2), 5+6 (SW3) und 7+8
(SW4) sind gekoppelt. Diese haben
eine doppelte Endstufe, um Motoren
oder Weichenantriebe in 2 Richtun-
gen betreiben zu können. Sie dürfen
deshalb nie gemeinsam eingeschaltet
werden. Eine integrierte Schutzsoft-
ware sperrt den Schaltvorgang, falls
die erste Richtung bereits eingeschal-
tet ist.
• Die Klemmen von F7+F8 (K5+K6) sind
doppelt belegt. Die Ausgänge 7+8
(SW4) sind nur nutzbar, wenn die
cannot work and the decoder will be
destroyed subsequently.
•
The factory setting of the DiMAX Mo-
tor/Switch Decoder is address 1..4. In
case a loco address is to be used, CV
29 must be altered accordingly.
•
Place the DiMAX Motor/Switch De-
coder in a protected location. The unit
must not be exposed to moisture.
•
The DiMAX Motor/Switch Decoder
must only be connected to digital
central stations for model railroads
according to the NMRA standards.
Connecting the module to other appli-
ances may lead to the destruction of
the unit.
2.1. Hook up
2.1.1. Function Outputs
• The function outputs 1+2 (SW1) , 3+4
(SW2), 5+6 (SW3) and 7+8 (SW4) are
coupled. These outputs feature a dual
power amplifier to facilitate the opera
-
tion of switch drives in two directions.
Therefore these coupled outputs must
never be operated at the same time.
An intelligent protection software
inhibits the operation in one direction
in case the reverse direction output is
switched on at the same time.
• The terminals of F7+F8 (K5+K6) have
a dual function. The outputs 7+8
(SW4) are only usable if the contact
Summary of Contents for DiMAX 8156001
Page 1: ...DiMAX 4 Kanal Schaltdekoder DiMAX 4 channel switch decoder Art Nr Item No 8156001 ...
Page 15: ...15 ...
Page 26: ...26 ...
Page 27: ...27 ...