3.1. Status LED (Activity)
The Operation Mode of the RC Receiver is shown by the STATUS
LED, named „ACT“. It may take the receiver up to 15 sec. after the
power-up to be ready for operation!
Operation Mode of the STATUS LED
On (steady)
Regular Operation
with one or several RC transmitters
Flashing symmetric
Radio interferences detected
Flashing asymmetric
RC Receiver Standby
After switch-on or if no RC transmitter is detected within a few
seconds.
3.2. RC Configuration
The RC configuration is set with the integrated DIP-switches. Four ra-
dio frequencies are available. If interferences occur, the frequency
may be changed to solve this problem and to ensure high quality ra-
dio control. A frequency change will also be required for the RC
transmitters. The transmitter settings are to be found in the Naviga-
17 DiMAX Multi-Funkempfänger / Multi-RC Receiver –
8130001
Illustration 5: Positioning and
Range