9
3.2. Digitale Kehrschleifen mittels
Kurzschlusserkennung
In dieser Schaltvariante benötigen
sie nur eine beidseitige Trennstelle in
beiden Einfahrten. Verschalten sie die
Gleise entsprechend dem Anschluss-
plan. Beachten sie jedoch bitte, dass
hier ein erhöhter Verschleiß durch Ab-
brand an Gleisen und Rädern entstehen
kann. Wenn Sie mehrere Kehrschleifen
nutzen, darf immer nur eine aktiv zur
gleichen Zeit befahren werden.
3.2. Digital reverse loops with
short circuit detection
This mode requires the reverse loop
section to be completely isolated from
the main layout at the entry and exit
points. Hook up the module according
to the wiring diagram. Please note that
this operation results in a higher burn
off at the wheels and the tracks. Operat-
ing multiple reverse loops in one layout
requires that only one loop at a time
may be used.
Abbildung 6: Digitale Kehrschleife mit Kurzschlusserkennung
Illustration #6: Digital reverse loop with short circuit detection