Electronic combine monitoring and control is key to achieving
maximum harvesting ef
fi
ciency. On the new Massey Ferguson
Centora and Fortia combines, these multi-functional,
straightforward systems allow operators to adjust settings
on-the-move and boost productivity as well as record
crop yield information.
Ultimate harvesting
ef
fi
ciency
16
Datavision II
Datavision II provides information
and the ability to alter settings. The
large touch-sensitive screen offers:
• Machine monitoring
• Harvesting data
• Machine settings
• Operator’s manual
• Diagnostics
• Yield mapping option
• Data transfer via a PCIMCA card
From this single Harvest screen
you are able to view up to eight
different functions simultaneously,
monitoring ef
fi
ciency and ensuring
maximum output is maintained,
without losses.
Electronic guardian
A vast array of engine and
harvesting elements are supervised
by Datavision II ensuring, for
example, operating temperatures
and shaft speeds are within
working limits. The Datavision
system only warns the operator
if a problem occurs. Therefore
it is not necessary for the
operator to constantly monitor
numerous controls.
All combines work best with an
even, constant feed. Cylinder load
monitor allows operators to keep
the combine working at optimum
capacity while ensuring it is
not overloaded.
At the same time, the screen also
shows grain losses from the straw
walkers and the sieves to help
ensure the setting is correct.
Constant Flow
To maintain optimum harvesting
ef
fi
ciency with minimum operator
input, Massey Ferguson offers the
intelligent but practical Constant
Flow system. The key to higher
outputs is to ensure the combine
is fully loaded at all times. Tests
prove the system can increase
capacity by up to 15% in wheat.
Datavision III on the
new MF rotary combine
Massey Ferguson’s new high
capacity combine harvester,
the MF Fortia rotary machine, is
equipped with the Datavision III
monitor and control system
operated through the advanced
colour C2000 Virtual Terminal.
Based on the tried and tested
software of Datavision II, the
new Datavision III system offers
enhanced functionality.
The fully ISOBUS compliant
C2000 Virtual Terminal uses a
touch screen, a series of buttons
and a rotary dial to scroll through
menus and select functions.
