MASSEY FERGUSON MF1839 -, Brochure

Page: 6 / 12

Accuracy in operation
Manual bale density control
Quick adjustment of the heavy-
duty tension springs on the manual
bale density system ensures the
correct amount of pressure is
applied to the top and bottom rails.
Bales are therefore produced to
your exact specification.
Hydraulic bale density control
(optional)
The hydraulic bale density control
provides a more effective means
of controlling bale density than
the spring controlled rails. The
hydraulic system uses it’s own
self-contained pump and reservoir.
The operator selects the pressure
required to build a specific weight
bale. As conditions become
damper or dryer, the density
cylinder will retract or extend to
maintain the desired bale weight,
keeping the bales more uniform
and saving the operator the time it
would take to re-adjust the manual
density springs.
Every part of the MF 1839 baler is designed to give accuracy,
reliability and productivity. The MF 1839 offers oustanding bale
density and a precision knotter system as well as easy servicing
and maintenance ensuring that your baler works to its full potential
for years to come.
06
Rugged knotter design
The knotters are designed and
built to operate reliably season
after season, with minimum fuss
or maintenance, whether using
plastic or sisal twine.
Power requirements
The centre-line design, with its
more efficient crop handling, helps
to keep tractor power requirement
low.
Twine boxes
Located either side of the baler, the
twine boxes hold 3 balls of either
plastic or sisal twine on each side.
Thanks to the positioning of the
two boxes, routing to the knotter is
closer and easier.
01 Massey Ferguson knotters are
designed for high throughput with
minimal maintenance.
02 Easily accessible twine
storage and straight forward twine
routing.
03 Manual spring loaded density
control.
04 Hydraulic bale density pump,
guage and control valve (optional).