MASSEY FERGUSON MF 260, Care Instructions

Page: 29 / 48

7
Chapter 14
How to Change Engine Oil and Filter
29
Method and Sequence of Changing the Engine Oil and Filter in
Tractor:
1- Before changing the engine oil, it is important for the tractor to be properly warmed so
oil is thinned and carries out the iron and carbon particles along with it.
2- Park the tractor on a level surface and turn off the engine.
3- Remove the drain plug located under the engine sump and drain the oil completely.
MF-240/350/260 MF-375/385
4- Remove oil filter with Filter Remover.
5- Clean the filter body thoroughly with a cloth, remove the old rubber ring and replace
with a new ring.
6- After filling the new filter with oil, tighten with the filter body.
Oil Filter MF-240/350 Oil Filter MF-260 Oil Filter MF-375/385/3854WD
7- Slowly fill fresh oil through the oil-inlet until it starts to come out of the oil drain plug
hole. Immediately re-plug the drain tightly.