13
Fig. 7 - Seismic Holes, Side Brackets & Fascia Mounting holes
3.9 Installing Bricks and Baffle
- Install Bricks in the following configurations. Refer Fig. 8
- First, install two full bricks 245x220x25 on the rear wall of the firebox by locking under the central
brick retainer.
- Then install three full bricks 230x115x25 on each left and the right side wall of the firebox. Push
these bricks towards the rear of the firebox.
- In the end, install one cut brick 230x90x25 each on the left and right side wall towards the front of
the firebox.
- The front and rear baffles of Rangitata ULEB are already in place. Make sure that the rear flange of
the rear baffle is tucked behind the side supports and hard against the rear wall fo the firebox. And
also, the front baffle is pushed back hard against the front of the rear baffle.
- Check that both the baffles are locked and hard up against the rear wall of the firebox.
- The front and the rear air tubes are already in place.
Fig. 8 - Rangitata Brick Configuration
Summary of Contents for RANGITATA ULEB
Page 21: ...21 Fig 14 Contents of the Rangitata Zero Clearance Box Pack ...
Page 34: ...34 ...
