AIRSLIDE REPLACEMENT FOR : NZ MODELS
-
R5000 LEG/PED ONLY):
Figure 8. Step one
Step One (Figure 8):
1.
Remove the door from the heater.
2.
Remove 2 x (M6X10) screws which
fasten the louver in position.
3.
Remove the louver from the heater.
Figure 9. Step two
Step Two (Figure 9):
1.
Remove 2 x M6 nuts from the back of
the air deflector, remove bolts and
spacers from front, hold air deflector in
place as you do this.
2.
Remove the Airslide from the heater
and discard this part marked 983221.
Figure 10. Step three
Step Three (Figure 10):
1.
Discard Airslide part 983221 air and
replace it with Airslide part 983278.
In New Zealand, a special Airslide marked 983278 must be fitted if the fan is
installed. Procedure for replacing Air Slide is shown as follows:
983221
