Masport Inbuilt Gas Fireplace
- 17 -
1) Turn the unit and pilot off and allow it to cool to
room temperature.
2) Unplug or disconnect power source to the fire.
3) Remove glass front (see page 10).
4) Remove logs (see page 14).
5) Loosen the screws securing the rear fan access
panel in place. Lift and withdraw the panel passing
the keyhole slots over the screw heads.
6) Remove the fan deflector just above the fan by
removing the 2 screws at either end and lifting it
free. Refer to fig on next page.
7) Unplug the fan switch lead from the fan stub lead.
8) Lift and withdraw the fan assy passing the keyhole
slots over the rubber mounting grommits .
CLEANING INSTRUCTIONS
The outside of the cabinet and glass should need
no more than an occasional wipe with a damp
cloth to remove any dust which may have settled.
All visible flame gas heaters can produce small
amounts of soot, particularly if the combustion air
entry slots under the heater are obstructed or the
aeration air inlets are clogged with lint.
After a period of time the inside of the glass may
require cleaning. To do this, carefully remove the
three glass pieces (See Glass Removal and
Assembly, page 10), and clean their inside
surfaces with a non-abrasive cloth and a
non-scratching type household cleaning liquid.
