Assembling the rotor and gate
l
Assemble the rotor and gate on the shaft.
Check for compression of the spring assembly.
•
Insert the fixation plate and fasten the screws.
Mind the lock washers! These need to be replaced every time the screws are
opened.
Use the appropriate torque value (see See Tightening torques on page 42
Ensure Disc Springs are oriented properly when placed onto the Locking Screw
with cup side pointing away from Locking Screw head. Failure to do so will result in
the Locking Screw vibrating loose.
Cup side of
disc spring
1x Disc Spring C100- C250
2x Disc Spring C300- C600
Use the appropriate torque value (see See Tightening torques on page 42)
l
Fasten the locking screw with the socket adapter. You may need to lock the shaft to prevent it from
turning, using the blocking tool (for part codes,).
Check if the peaks of the rotor are located slightly behind the front surface of the
middle ring.
• Remove the blocking tool.
36
m-certa-en-08
