Getting Started with MightySat
Compatibility
Note
: Compatibility is limited to Models 9800 and 9900 only.
For select Android®-powered devices.
For select Apple® devices.
Operation
MightySat Features
ID
Description
Function
1
Enclosure Clip
Clip provided for ease of lanyard attachment.
2
Bluetooth Indicator (For Models 9800 and
9900)
Indicates when Bluetooth is enabled on the device.
3
Battery Status Indicator
Indicates the remaining relative life of the battery.
4
Display Screen
Display for measurements and indicators.
Note:
Numbers will dim when confidence in the value is low.
5
Waveform and SIQ
Display of the pleth waveform and the SIQ provides an indicator of the relative
signal strength.
6
Touchpad
User interface to allow for change of settings (see
Using the Touchpad
section in
this manual).
Installing the AAA Batteries
The MightySat requires two alkaline AAA batteries to operate. To install batteries, follow the instructions
below:
Warning:
Before changing batteries, make sure the device is off and is not applied to a finger.
1.
Orient the MightySat so that the display screen is facing downwards. Locate the battery button on
the front of the sensor pad.
2.
Push lightly on the battery button to release the battery cover and then remove the battery cover.
3.
Locate the battery orientation labels (+ and -) provided inside the battery compartment.
4.
Insert two new AAA alkaline batteries and carefully match the orientation labels (+ and -).
Caution:
MightySat will not work if the batteries are inserted in the incorrect orientation.
5.
Once the batteries are correctly inserted, carefully snap the battery door back onto the device.
Warning:
Ensure that the battery door is intact before use.
Note
: MightySat will automatically activate when the device is opened so that the sensor pads are
exposed as shown in the image below.
Using MightySat
To take readings with the MightySat, follow the instruction below:
Note:
Before use, ensure batteries are correctly installed in the MightySat.
1.
MightySat will automatically activate when the device is opened so that the sensor pads are
exposed.
2.
To open the MightySat squeeze the back portion of the device as shown in the image above.
3.
Once the sensor pads are exposed, insert a finger (non-dominant, ring finger) so the sensor LED is
above the fingernail.
Note:
The display screen of the MightySat should be facing upwards as depicted in the image above.
4.
Position the finger so that the tip of the finger touches the backstop provided at the end of the
sensor pad as shown in the image below.
5.
Once the finger is correctly positioned, gently close the MightySat by releasing the pressure on the
back of the device.
Note:
Ensure the finger is correctly positioned for accurate measurements.
6.
Once the MightySat is correctly closed on the finger, the MightySat will display readings.
Note:
If no readings are displayed, see
Troubleshooting
section in this manual.
Warning:
While on the finger, do not press the top of the device against any surface.
Warning:
Do not attempt to secure the MightySat to the finger using external pressure. The internal
spring provides the correct pressure; additional pressure may cause inaccurate readings.
Turning off MightySat
The MightySat automatically turns off after removing the finger from the device in the absence of device
interaction or connection to a smart device.
Using the Touchpad
The Touchpad
on MightySat device is located below the display screen.
Note:
The display is not a touch screen.
Action
Description
Function
Touch
Tap and release. Action will be performed
once finger is released.
Select a menu item or action
Touch rotates the display clockwise
Press and Hold
Press and hold. Release finger once action
has been performed.
Enter and Exit the Main Screen
Swipe
Touch and slide (left, and right) and
release.
Scroll through all selectable menu options.
Navigating the Menu
From the Main Screen, press and hold the Touchpad to access the Main Menu.
Use the Touchpad
Swipe
gesture to scroll through the Main Menu Options. Use the
Touch
gesture to select
the Main Menu Option. Use the same gestures to adjust settings.
The Menu options are:
Main Menu Options
Display Button
Description
Default
Options
Back
Return to Main screen
N/A
N/A
Waveform
Allows the user to choose if the
waveform will be displayed on the
screen.
On
On or Off
Brightness
Change the brightness of the
display screen.
100%
25%, 50%, 75% and
100%
About
Hardware and software information
about the device including serial
number, software version, and
Bluetooth LE Mac Address.
N/A
N/A
Bluetooth (Models 9800
and 9900 only)
Allows the user to connect to a
smart device via Bluetooth LE.
On
On or Off
Cleaning and Service
Cleaning MightySat
Warning:
Before cleaning, read
Cleaning and Service Warnings and Cautions
section
in this manual.
Warning:
Before cleaning, make sure the device is off and is not applied to a
finger.
Note
: Before cleaning, remove the batteries and make sure the battery cover is attached correctly.
To clean the MightySat, follow the instructions below:
•
The outer surfaces can be cleaned either with a soft cloth dampened with a mild detergent and warm
water solution or they can be wiped down with the following cleaning solutions:
•
Cidex Plus (3.4% glutaraldehyde)
•
10% bleach solution
•
70% isopropyl alcohol solution
•
Allow the MightySat to dry thoroughly before using again.
Caution:
To avoid permanent damage to the MightySat, do not use undiluted bleach (5% - 5.25%
sodium hypochlorite) or any other cleaning solution not recommended.
Service
Warning:
Do not attempt to repair the MightySat as this may cause damage to the device and prevent it
from operating properly.
If the device does not appear to be operating correctly, see
Troubleshooting
section in this manual.
Note:
To maintain the proper functionality of the battery compartment and avoid possible damage from
alkaline batteries that may leak, remove batteries from the device when not in use for long periods of time.
